How to power cycle the camera

Power Cycling generally refers to fully powering an electronic device off, usually disconnecting it from any source of power. This is a useful troubleshooting tool because it helps reset the device and its connections. This can help solve many troubleshooting issues. To do this, follow these steps:

  1. Unplug the camera from its power source. This can be done either on the wall or camera side.
  2. Allow 5-10 seconds to pass for the camera to completely discharge.
  3. Plug the camera back into the power source and allow it reinitialize. 
Was this article helpful?
425 out of 959 found this helpful
Have more questions? Submit a request