Keypad Installation Guide

What’s in the box?
  • 1x Wyze Lock Keypad
  • 1x Keypad Mounting Plate with Adhesive
  • 2x AA Batteries
  • 2x Screws

Required Tools

  • 1x Philips Screwdriver or Power Drill

Wyze Lock Keypad Installation

  1. Remove the backing of the adhesive on the back of the Keypad Mounting Plate.
    77557852_max.jpg
  2. Press the Keypad Mounting Plate against the wall in the location you want to install it.77557856_max.jpg
  3. Use the included screws to secure the Keypad Mounting Plate to the wall.77557857_max.jpg
  4. Remove the back panel of the Keypad, insert the included batteries, and replace the back panel.77557861_max.jpg
  5. Attach the Keypad to the mounting plate.
    77557864_max.jpg
  6. Your Wyze Lock Keypad is now successfully installed!

Now that your Keypad is installed, check out our Keypad Setup Guide to get it connected to your Wyze Lock.

Was this article helpful?
7 out of 12 found this helpful
Have more questions? Submit a request